TECH IMPRO AUTOMATION SOLUTION SDN BHD
7263, 1st Floor, Lorong Chempa, 12200 Butterworth, Penang, Malaysia.
+6012-466 1514

TSURUGA MODEL 356M AC m¦¸ tester with 20 CH Scanner

Previous 2 / 3 Next

TSURUGA MODEL 356M AC m¦¸ tester with 20 CH Scanner AC m¦¸ Meter Measuring Instrument & Tester Tsuruga
Quantity
Add Quotation


  • ¡öAC mΩ meter, max. 40 CH scanner possible
  • ¡öResistance measurement range 30 mΩ/300 mΩ/3 Ω
  • ¡öOpen terminal voltage 20 mV peak or less
  • ¡öEnables to measure cell voltage and resistance of rechargeable battery and Fuel cell.
  • ¡ö2 outputs of upper comparison judgment
  •  

Measuement range

¡öResistance measurement
Measurement range Note 1 30 mΩ 300 mΩ 3 Ω
Resolution 1 μΩ 10 μΩ 100 μΩ
Measuring current 7.4 mA 1 mA 100 μA
Accuracy Note 2 ± (0.5 % of rdg. + 8 dgt.)
Temperature coefficient ± (0.05 % of rdg. + 0.8 dgt.) / ¡æ
Open terminal voltage Less than 20 mV peak (with OFF function)
¡öVoltage measurement
Measurement range Note 1 ± 5 V ± 50 V
Resolution 100 μV 1 mV
Accuracy Note 2 ± (0.05 % of rdg. + 5dgt.)
Temperature coefficient ± (0.005 % of rdg. +0.5 dgt.) / ¡æ

Note1: All CH, the same range
Note 2: Specified at 23 ¡æ ± 5 ¡æ, 45 to 75 % RH


Specification

Measuring method AC 4 terminal method (Resistance measurement)
Measuring frequency AC 1 kHz ± 20 Hz (Resistance measurement)
Sampling cycle 10 times / s. (Resistance, voltage measurement)
Measurement terminal Connector of 2.54 mm pitch, MIL-C-86503 standard
Wiring resistance Source side: Less than 0.1 Ω
Display LCD display
Resistance measurement: 35000
Voltage measurement: 50000 (with polarity indication)
Measuring mode
Automatic measurement: Measure resistance and voltage from CH 1 till set CH,
then switched to waiting.
'AUTO' mode: The measured data is saved in 356M, the data can be downloaded to PC.
'FULL' mode: Each measurement of each CH is output.
Manual measurement: Resistance and voltage of manually set CH are measured.
Measuring time
(During automatic measurement)
Select 1 s. or 2 s. for one CH
Measuring time of 1 s.:aprx. 900 ms., 2 s.: aprx.1900 ms.
Judgment Upper limit (H1, H2) can be set.
Output condition: The resistance of more than 1 CH > H1・・・ Relay ON
The resistance of more than 1 CH > H2・・・ Relay ON
Contact capacity: AC 250 V, 1 A (Resistance load), 1 A. 1a contact
Insulation resistance DC 500 V, more than 50 MΩ
Withstanding voltage AC 1500 V, 1 min.
Power supply tolerance AC 90 to 250 V (356M, 5811-71)
Operating ambient temperature 0 to 50 ¡æ
Storage temperature -20 to 70 ¡æ
Weight 356M aprx. 1 kg, 5811-71 aprx. 1 kg
Dimension 205 (W) x 64 (H) x 169 (D) mm
Serial communication  RS-232C
Transmission system: Start-stop synchronization full duplex
Transmission rate: 2400, 4800, 9600 bps
Data bit length: 7 bit, 8 bit
Stop bit: 1 bit
Xon, Xoff: No Control
Accessory
356M Utility software (CD) 1 pc
RS-232C cable 1 pc
Power cord 1 pc
Power fuse 1 pc
Operation manual 1 pc
5811-71 Power cord 1 pc
Unit connect cable 1 pc
Measurement cable Not included, manufacturable based on meeting with us.

Application
Internal resistance of Battery, contact resistance etc.
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version