0

TECH IMPRO AUTOMATION SOLUTION SDN BHD
25, Jalan Chain Ferry, Taman Chai Leng, 13700 Perai, Pulau Pinang, Malaysia.
+6012-466 1514
sales@improtechonline.com
+60124661514

TSURUGA MODEL 3568

AllTsurugaMeasuring Instrument & TesterPortable DC Ohm Meter

Previous 2 / 2 Next

TSURUGA MODEL 3568 Portable DC Ohm Meter Measuring Instrument & Tester Tsuruga
Quantity
Add Quotation


  • ¡ö6 ranges from 300 mΩ to 30 kΩ are available
  • ¡ö4-terminal method minimizes the resistance of lead wire
  • ¡öAvailable with AC or battery pack power supply
  • ¡öLight weight: 1 kg
  •  
Specification
¡öResistance measurement
Measurement range Note 1 30 mΩ 300 mΩ 3 Ω
Resolution 1 μΩ 10 μΩ 100 μΩ
Measuring current 7.4 mA 1 mA 100 μA
Accuracy Note 2 ± (0.5 % of rdg. + 8 dgt.)
Temperature coefficient ± (0.05 % of rdg. + 0.8 dgt.) / ¡æ
Open terminal voltage Less than 20 mV peak (with OFF function)
¡öVoltage measurement
Measurement range Note 1 ± 5 V ± 50 V
Resolution 100 μV 1 mV
Accuracy Note 2 ± (0.05 % of rdg. + 5dgt.)
Temperature coefficient ± (0.005 % of rdg. +0.5 dgt.) / ¡æ

Note1: All CH, the same range
Note 2: Specified at 23 ¡æ ± 5 ¡æ, 45 to 75 % RH

Measuring method AC 4 terminal method (Resistance measurement)
Measuring frequency AC 1 kHz ± 20 Hz (Resistance measurement)
Sampling cycle 10 times / s. (Resistance, voltage measurement)
Measurement terminal Connector of 2.54 mm pitch, MIL-C-86503 standard
Wiring resistance Source side: Less than 0.1 Ω
Display LCD display
Resistance measurement: 35000
Voltage measurement: 50000 (with polarity indication)
Measuring mode
Automatic measurement: Measure resistance and voltage from CH 1 till set CH,
then switched to waiting.
'AUTO' mode: The measured data is saved in 356M, the data can be downloaded to PC.
'FULL' mode: Each measurement of each CH is output.
Manual measurement: Resistance and voltage of manually set CH are measured.
Measuring time
(During automatic measurement)		 Select 1 s. or 2 s. for one CH
Measuring time of 1 s.:aprx. 900 ms., 2 s.: aprx.1900 ms.
Judgment Upper limit (H1, H2) can be set.
Output condition: The resistance of more than 1 CH > H1・・・ Relay ON
The resistance of more than 1 CH > H2・・・ Relay ON
Contact capacity: AC 250 V, 1 A (Resistance load), 1 A. 1a contact
Insulation resistance DC 500 V, more than 50 MΩ
Withstanding voltage AC 1500 V, 1 min.
Power supply tolerance AC 90 to 250 V (356M, 5811-71)
Operating ambient temperature 0 to 50 ¡æ
Storage temperature -20 to 70 ¡æ
Weight 356M aprx. 1 kg, 5811-71 aprx. 1 kg
Dimension 205 (W) x 64 (H) x 169 (D) mm
Serial communication  RS-232C
Transmission system: Start-stop synchronization full duplex
Transmission rate: 2400, 4800, 9600 bps
Data bit length: 7 bit, 8 bit
Stop bit: 1 bit
Xon, Xoff: No Control
Accessory
356M Utility software (CD) 1 pc
RS-232C cable 1 pc
Power cord 1 pc
Power fuse 1 pc
Operation manual 1 pc
5811-71 Power cord 1 pc
Unit connect cable 1 pc
Measurement cable Not included, manufacturable based on meeting with us.

Application
Internal resistance of Battery, contact resistance etc.
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Quick Links

Recent Post

Contact

25, Jalan Chain Ferry, Taman Chai Leng, 13700 Perai, Pulau Pinang, Malaysia.

+6012-466 1514

sales@improtechonline.com

+60124661514
Message Us

https://www.improtechonline.com

© 2021 - 2025 TECH IMPRO AUTOMATION SOLUTION SDN BHD (1262289-X) | Privacy Policy        Visitors: 1800452
Powered by NEWPAGES
You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version